Fixaball M8 Wall Shield Anchor Stud Nut Masonry Concrete Brick

For heavy-duty masonry fixings, the Fixaball M8 projecting bolt shield anchor provides a nut and stud type expansion fixing for concrete, brick, block and non-porous stone. This 8mm diameter anchor uses a 3-part shield with a threaded bar, nut and washer, expanding at 3 points as the nut is tightened.

The projecting threaded bar helps hold fixtures in position during installation, making it suitable where alignment needs to be maintained while fixing. It can also accommodate holes that vary in size or quality, provided installation is carried out correctly and the base material is suitable.

Key features

• Thread diameter: M8
• Diameter: 8mm
• Nut and stud type projecting bolt shield anchor
• Suitable for concrete, brick, block and non-porous stone
• 3-part shield with threaded bar, nut and washer
• Expands at 3 points as the nut is tightened

Specifications

• Hole diameter: 14
• Hole depth: 55
• Fixture/material clearance hole: 9 – 10
• Center spacing between holes: 150
• Minimum distance from edge of material: 100
• Tensile/pull load: 4. 8 k/N (tonnes)
• Shear load: 4. 4 k/N (tonnes)
• Torque to tighten: 15 Nm

Sizing

• Max joining thicknesses available: 15mm
• Max joining thicknesses available: 40mm
• Max joining thicknesses available: 80mm

Care and maintenance

Take care not to damage the thread during installation.

Safety information

• All specifications are true with correct installation.
• A shield anchor will only ever be as good as the grade of material that it is being fixed to.

Rackhams Reference : GYN19DSI9H