Monstershop Adjustable 3 Section Galvanised Staircase - 900mm Wide

From MonsterShop, this adjustable 3 section galvanised Staircase is designed to provide secure, practical access in a wide range of settings, including businesses, garages and warehouses. Made from galvanised steel, it offers a weatherproof, corrosion-resistant finish suited to both indoor and outdoor use.

Each step is built with a spacious 900mm-wide tread and a 240mm depth, supported by a 3mm tread bar thickness and 5mm supporting rods for added strength. For a more tailored fit, the height can be customised, with the option to expand from a 3-step staircase by adding up to a further 9 steps to create a maximum 12-step configuration. Non-slip treads help provide a secure grip underfoot, while the design allows the bottom section to be fixed to the ground and the top to be affixed to a wall for stability during use.

Key features

• Material: galvanised steel with a weatherproof, corrosion-resistant finish
• Adjustable 3 section step design
• Non-slip treads for secure footing
• Designed to attach with the bottom section fixed to the ground and the top affixed to a wall
• Expandable from 3 steps by adding up to a further 9 steps, to a maximum 12-step configuration
• Step tread size: 900mm W x 240mm D
• Tread bar thickness: 3mm
• Supporting rods thickness: 5mm

Sizing

• Step width: 900mm
• Step depth: 240mm

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Specifications

• Colour: Silver
• Material: Galvanised Steel
• Weight: 32. 8kg
• Step Height: 30mm / 3cm / 1. 2”
• Total Staircase Height: 600mm / 60cm / 0. 6m
• Width: 900mm / 90cm / 35. 4”
• Step Depth: 240mm / 24cm / 9. 4”
• Staircase Total Depth: 645mm / 64. 5cm / 25. 4"
• Mesh Size: 20mm x 25mm
• Step Spacing: 170mm / 17cm / 6. 7”
• Tread Bar Thickness: 3mm / 0. 3cm / 0. 1”
• Tread Rod Thickness: 5mm / 0. 5cm / 0. 2”
• Upper Plate: 4mm Thick, 100mm Height
• Holding Plate: 4mm Thick, 200mm Height
• Lower Plate: 4mm Thick, 300mm Height
• Maximum Number Of Steps: 12
• Corrosion Protection: Hot Dip Galvanised (EN ISO 1461)
• Grating Standard: DIN 24537

Box Contents:

• 3 x 900mm W x 240mm D Treads
• 2 x 100mm H Upper plates
• 2 x 200mm Holding Plates
• 2 x 300 H Lower plates
• 1 x Essential Fixings Kit