Monstershop Adjustable 11 Section Galvanised Staircase - 900mm Wide

From Monstershop, this adjustable 11 section galvanised staircase offers a robust, weatherproof access solution for spaces where dependable footing matters. Made from galvanised steel, it is designed to stand up to corrosion for use in a range of environments, including garages and warehouses.

Each step is formed with a generous 900mm-wide tread and a 240mm depth, creating a stable platform underfoot. For added strength, the tread bar thickness is 3mm, supported by 5mm rods. A height customisation feature allows the staircase to be tailored to your requirements, with the option to extend from an 11-step set-up to a maximum 12-step configuration by adding a further 1 step.

Non-slip treads help provide secure grip, while the design allows the bottom section to be fixed to the ground and the top to be affixed to a wall for stability during use. Essential fixings are included to support a straightforward assembly.

Key features

• Material: galvanised steel with a weatherproof finish
• Adjustable height with the option to add a further 1 step
• 11 section step design, expandable to a maximum 12-step configuration
• Non-slip treads for secure footing
• Bottom section attaches to the ground; top fixes to a wall for stability
• Essential fixings included

Sizing

• Tread: 900mm W x 240mm D
• Tread bar thickness: 3mm
• Supporting rods: 5mm

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Specifications

• Colour: Silver
• Material: Galvanised Steel
• Weight: 124. 8kg
• Step Height: 30mm / 3cm / 1. 2”
• Total Staircase Height: 2200mm / 220cm / 2. 2m
• Width: 900mm / 90cm / 35. 4”
• Step Depth: 240mm / 24cm / 9. 4"
• Staircase Total Depth: 2445mm / 244. 5cm / 2. 4m
• Mesh Size: 20mm x 25mm
• Step Spacing: 170mm / 17cm / 6. 7”
• Tread Bar Thickness: 3mm / 0. 3cm / 0. 1”
• Tread Rod Thickness: 5mm / 0. 5cm / 0. 2”
• Upper Plate: 4mm Thick, 100mm Height
• Holding Plate: 4mm Thick, 200mm Height
• Lower Plate: 4mm Thick, 300mm Height
• Maximum Number Of Steps: 12
• Corrosion Protection: Hot Dip Galvanised (EN ISO 1461)
• Grating Standard: DIN 24537

Box Contents:

• 11 x 900mm W x 240mm D Treads
• 2 x 100mm H Upper plates
• 18 x 200mm Holding Plates
• 2 x 300 H Lower plates
• 1 x Essential Fixings Kit