Monstershop Adjustable 5 Section Galvanised Staircase - 900mm Wide

From MonsterShop, this adjustable 5 section Galvanised Staircase offers a practical, hard-wearing access solution for spaces where dependable footing matters. Made from galvanised steel with a corrosion-resistant finish, it’s designed to stand up to use in a range of environments, including indoor and outdoor settings.

Each step is formed with a generous 900mm-wide tread and a 240mm depth, supported by a 3mm tread bar thickness and 5mm supporting rods for added strength. Non-slip treads help provide secure grip underfoot, while the design allows the bottom section to be fixed to the ground and the top to be affixed to a wall for stability during use. For added flexibility, the staircase can be customised in height, with the option to add a further 7 steps to the 5-step configuration, creating a maximum 12-step setup. Essential fixings are included to support assembly.

Key features

• Material: galvanised steel with a corrosion-resistant finish
• 5 section step design with height customisation
• Non-slip treads for secure footing
• Step tread size: 900mm wide x 240mm deep
• 3mm tread bar thickness with 5mm supporting rods
• Expandable from 5 steps up to a maximum 12-step configuration (add a further 7 steps)
• Essential fixings included for assembly

Sizing

• Step tread: 900mm W x 240mm D

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Specifications

• Colour: Silver
• Material: Galvanised Steel
• Weight: 56kg
• Step Height: 30mm / 3cm / 1. 2”
• Total Staircase Height: 1000mm / 100cm / 1m
• Width: 900mm / 90cm / 35. 4”
• Step Depth: 240mm / 24cm / 9. 4”
• Staircase Total Depth: 1095mm / 109. 5cm / 1. 1m
• Mesh Size: 20mm x 25mm
• Step Spacing: 170mm / 17cm / 6. 7”
• Tread Bar Thickness: 3mm / 0. 3cm / 0. 1”
• Tread Rod Thickness: 5mm / 0. 5cm / 0. 2”
• Upper Plate: 4mm Thick, 100mm Height
• Holding Plate: 4mm Thick, 200mm Height
• Lower Plate: 4mm Thick, 300mm Height
• Maximum Number Of Steps: 12
• Corrosion Protection: Hot Dip Galvanised (EN ISO 1461)
• Grating Standard: DIN 24537

Box Contents:

• 5 x 900mm W x 240mm D Treads
• 2 x 100mm H Upper plates
• 6 x 200mm Holding Plates
• 2 x 300 H Lower plates
• 1 x Essential Fixings Kit