Monstershop Adjustable 4 Section Galvanised Staircase - 900mm Wide

From Monstershop, this adjustable 4 section Galvanised Staircase is designed to provide dependable access in a wide range of settings, from garages and warehouses to other indoor and outdoor spaces. Made from galvanised steel, it offers a weatherproof, corrosion-resistant finish suited to demanding environments.

Each step features a generous 900mm-wide tread with a 240mm depth, supported by a 3mm tread bar thickness and 5mm supporting rods for added strength. For secure footing, the staircase is fitted with non-slip treads, while the bottom section is designed to attach to the ground and the top to a wall for stability during use.

Built to adapt as requirements change, the height can be customised, with the option to add a further 8 steps to the 4-step staircase to create a maximum 12-step configuration. Essential fixings are included to support a straightforward assembly process.

Key features

• Material: galvanised steel with a weatherproof, corrosion-resistant finish
• Adjustable height design
• 4 section step design, expandable to a maximum 12-step configuration
• Step tread size: 900mm wide x 240mm deep
• 3mm tread bar thickness with 5mm supporting rods
• Non-slip treads for secure footing
• Designed to fix at the bottom to the ground and at the top to a wall

Sizing

• Step tread: 900mm W x 240mm D

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Specifications

• Colour: Silver
• Material: Galvanised Steel
• Weight: 44. 3kg
• Step Height: 30mm / 3cm / 1. 2”
• Total Staircase Height: 800mm / 80cm / 0. 8m
• Width: 900mm / 90cm / 35. 4”
• Step Depth: 240mm / 24cm / 9. 4”
• Staircase Total Depth: 870mm / 87cm / 0. 9m
• Mesh Size: 20mm x 25mm
• Step Spacing: 170mm / 17cm / 6. 7”
• Tread Bar Thickness: 3mm / 0. 3cm / 0. 1”
• Tread Rod Thickness: 5mm / 0. 5cm / 0. 2”
• Upper Plate: 4mm Thick, 100mm Height
• Holding Plate: 4mm Thick, 200mm Height
• Lower Plate: 4mm Thick, 300mm Height
• Maximum Number Of Steps: 12
• Corrosion Protection: Hot Dip Galvanised (EN ISO 1461)
• Grating Standard: DIN 24537

Box Contents:

• 4 x 900mm W x 240mm D Treads
• 2 x 100mm H Upper plates
• 4 x 200mm Holding Plates
• 2 x 300 H Lower plates
• 1 x Essential Fixings Kit