Monstershop Adjustable 7 Section Galvanised Staircase - 900mm Wide

From MonsterShop, this adjustable 7 section Galvanised Staircase is designed to provide dependable access in a range of settings, from garages and warehouses to other indoor and outdoor spaces. Made from galvanised steel with a weatherproof finish, it offers strong resistance to corrosion for long-lasting use in demanding environments.

Each step is built with a generous 900mm-wide tread and a 240mm depth, supported by a 3mm tread bar thickness and 5mm supporting rods for added strength. For added reassurance underfoot, the staircase features non-slip treads, while the bottom section is designed to attach securely to the ground and the top to a wall for stability during use.

Height customisation allows the staircase to adapt to your requirements, with the option to add a further 5 steps to the 7-step design to create a maximum 12-step configuration. Essential fixings are included to support a swift, straightforward assembly.

Key features

• Material: galvanised steel with a weatherproof finish
• 7 section step design with adjustable height
• Option to add a further 5 steps for a maximum 12-step configuration
• Non-slip treads for secure footing
• Designed to fix at the bottom to the ground and at the top to a wall
• Essential fixings included
• Model number: 900mm wide

Sizing

• Tread: 900mm W x 240mm D
• Tread bar thickness: 3mm
• Supporting rods: 5mm

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Specifications

• Colour: Silver
• Material: Galvanised Steel
• Weight: 78. 8kg
• Step Height: 30mm / 3cm / 1. 2”
• Total Staircase Height: 1400mm / 140cm / 1. 4m
• Width: 900mm / 90cm / 35. 4”
• Step Depth: 240mm / 24cm / 9. 4”
• Staircase Total Depth: 1545mm / 154. 5cm / 1. 5m
• Mesh Size: 20mm x 25mm
• Step Spacing: 170mm / 17cm / 6. 7”
• Tread Bar Thickness: 3mm / 0. 3cm / 0. 1”
• Tread Rod Thickness: 5mm / 0. 5cm / 0. 2”
• Upper Plate: 4mm Thick, 100mm Height
• Holding Plate: 4mm Thick, 200mm Height
• Lower Plate: 4mm Thick, 300mm Height
• Maximum Number Of Steps: 12
• Corrosion Protection: Hot Dip Galvanised (EN ISO 1461)
• Grating Standard: DIN 24537

Box Contents:

• 7 x 900mm W x 240mm D Treads
• 2 x 100mm H Upper plates
• 10 x 200mm Holding Plates
• 2 x 300 H Lower plates
• 1 x Essential Fixings Kit