Arbor Garden Solutions Rectangular Pergola And Decking Kit With Balustrade V.5

Create a defined outdoor area with the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.5, a coordinated pergola and decking kit supplied with pre-cut components and step-by-step instructions. Designed to form a level decking/base area with a pergola structure above, it’s a considered way to zone a garden or patio and connect adjoining spaces with a consistent finish.

The listed rectangular size refers to the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base; for example, where the base area is 2.4m x 3.0m, the structural post footprint would be approximately 2.4m x 1.5m, with a standard 45cm overhang on all sides. Posts are supplied at 2.7m and can be trimmed if required for a free-standing structure.

Key features

• Rectangular pergola and decking kit with balustrade
• Pre-cut components with step-by-step instructions
• Decking boards: 32mm x 125mm grooved, green treated, FSC
• Uprights: 94 x 94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified
• Rafters: CLS C16 Scandinavian pine 2 x 6 (38mm x 138mm)
• Braces: CLS C16 Scandinavian pine 2 x 4 (38mm x 89mm)
• Pre-drilled holes and included fixings for assembly
• All necessary hardware for assembly is included

How to assemble

• Prepare the area by ensuring a flat, level surface
• Assemble the decking frame using the joists, beams and decking planks, checking spacing with the supplied spacer block
• Install the pergola structure by positioning the upright posts, then attaching runners and rafters using the pre-drilled holes and fixings
• Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed
• Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder
• Assembly requires a 10mm socket and screwdriver; a battery-operated model is recommended

Treatment & maintenance

Sweep regularly to remove leaves, dirt and debris. Every few months, wash using mild soap and water with a soft-bristle brush; avoid high pressure washer settings. Inspect at least once a year for loose screws, nails or cracked boards, tightening fasteners and replacing damaged boards as needed. Apply a wood sealant or stain every 1-3 years; to check if sealing is needed, sprinkle water on the boards—if it absorbs quickly, apply a new coat. Use rubber or felt pads under furniture legs, keep planters elevated, and choose breathable outdoor rugs. In winter, clear snow with a plastic shovel and avoid harsh de-icing salts.

Please note that due to the inherent characteristics of natural timber, product colours may vary from those depicted.

Support & warranty

Lifetime warranty covers manufacturing faults.

Please note

The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Natural timber products may vary in colour and grain from images shown.

Rackhams Reference : BQW9YMFUWY