Arbor Garden Solutions Rectangular Pergola And Decking Kit With Balustrade V.6

Designed for considered outdoor living, the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.6 combines a pergola structure with a matching decking base and balustrade detailing. Supplied with pre-cut components and step-by-step instructions, it is intended to create a defined area in the garden or on a patio, with a level surface underfoot and a clear sense of structure for seating and outdoor use.

For rectangular kits, the stated size reflects the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base; for a 2.4m x 3.0m base area, the structural post footprint would be approximately 2.4m x 1.5m, with a standard 45cm overhang on all sides. When planning furniture placement or base construction, refer to these internal dimensions.

Key features

• Pre-cut components with step-by-step instructions provided
• Posts supplied at 2.7m and can be trimmed if required for a free-standing structure
• Spacer block provided to support correct spacing during decking installation
• Pre-drilled holes for pergola assembly
• Pre-assembled balustrades
• All necessary hardware for assembly included
• Decking boards are grooved, green treated and FSC certified
• Uprights are UC4 and 70% PEFC certified

Specifications

Timber

• Rafters: CLS C16 Scandinavian Pine 2x6 (38mm x 138mm)
• Braces: CLS C16 Scandinavian Pine 2x4 (38mm x 89mm)
• Uprights: 94x94 Redwood ‘A’ Quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified
• Decking boards: 32mm x 125mm, grooved, green treated, FSC

How to assemble

• Prepare the area by ensuring a flat, level surface before assembling the frame
• Assemble the decking frame by securing the joists, beams and decking planks, using the spacer block for spacing
• Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via the pre-drilled holes
• Attach the pre-assembled balustrades, checking alignment and fixing securely
• Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder
• Assembly requires a 10mm socket and screwdriver

Treatment & maintenance

Natural timber may vary in colour from images shown due to the inherent characteristics of wood.

Sweep regularly to remove leaves, dirt and debris. Every few months, wash using mild soap and water with a soft-bristle brush; avoid high pressure washer settings. Inspect at least once a year for loose screws, nails or cracked boards, tightening fasteners and replacing damaged boards as needed. Apply a wood sealant or stain every 1-3 years; a water sprinkle test can be used to check if sealing is needed (if water absorbs quickly, apply a new coat). In winter, clear snow with a plastic shovel and avoid harsh de-icing salts.

Support & warranty

Lifetime warranty covers manufacturing faults.

Please note

The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Natural timber products may vary in colour and grain from images shown.

Rackhams Reference : H2XWHYQWZN