Ener-J 3-Gang Wireless Kinetic Light Switch, White, Self-Powered, IP65 Waterproof (Pro Series) with 3 X 500W RF Non-Dimmable Receiver Module

Ener-J brings flexible wireless lighting control to modern interiors with this Pro Series 3-gang kinetic light switch and 3 x 500W RF non-dimmable receiver module set. Finished in white, it provides independent control of three lighting circuits from one wall-mounted switch, without batteries or internal wiring in the switch itself.

Using self-powered kinetic technology, each press generates the energy needed to send a wireless signal on 433MHz. The switch is rated IP65, making it suitable for high-moisture areas, while the compact receiver modules install between the mains supply and lighting circuit for retrofit projects where new cabling is difficult or costly. This set suits residential and light commercial spaces, including extensions, offices and other layouts where flexible switch positioning is needed.

Key features

• 3-gang independent control for three separate lighting circuits or zones
• White finish
• Self-powered kinetic switch operation with no batteries required
• IP65 rated switch
• 433MHz wireless signal
• Up to 30 metres range through walls and up to 100 metres in open spaces
• 3 x 500W RF non-dimmable receiver modules included
• Compatible with Ener-J Pro Range models including WS1024, WS1025, WS1035 and WS1021

Specifications

Switch

• Tested for over 200,000 clicks
• Mounts on glass, wood, marble or tile
• Installation with included 3M adhesive tape or screws

Receiver

• Maximum LED lighting load: 500W
• Maximum load for other lighting types: 1100W
• Rated current: 5A
• Standby power consumption: less than 0.5W
• One switch can be paired with multiple receivers for group control
• Multiple switches can be paired to one receiver for 2-way or 3-way switching

Installation

• Receiver modules install between the mains supply and the lighting circuit
• No back-box required for the switch
• Receiver modules can be concealed inside ceiling roses, junction boxes or behind light fittings

In the box

• 1 x Ener-J Pro Series 3-gang wireless kinetic light switch
• 3 x 500W RF non-dimmable receiver modules
• 3M adhesive tape
• Screws

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Rackhams Reference : WCQP2REDAL