Fixaball 16mm Sleeve Masonry Anchors ZYP Nut Type

For secure fixing into masonry, brick, concrete and stone, these Fixaball sleeve masonry anchors feature a 16mm diameter body with an M12 hex nut and stud. The zinc plated nut type suits dry-use applications and is available in 65mm, 110mm and 150mm lengths.

The thin-walled sleeve construction is suitable for concrete, stone, brickwork, perforated bricks and dense concrete blocks. A diagonal slot allows small gaps to be pulled down so the fixture can be clamped firmly in place.

Key features

• 16mm diameter sleeve masonry anchor
• M12 thread diameter
• Zinc plated finish
• Suitable for brick, block, concrete and non-porous stone
• Nut type sleeve anchor

Specifications

• Fixture hole size: 19mm
• Thread diameter: M12

Sizing

• 16 x 65
• 16 x 110
• 16 x 150

Care and maintenance

Use in dry conditions to maintain reliability.

Safety information

• Using a zinc sleeve anchor in wet conditions will negatively affect reliability and can cause earlier failure.
• Drill the correct size hole, clear and clean the hole, then tighten the nut to set the anchor.
• Avoid over-tightening the nut.

Rackhams Reference : 213JQKQFQZ