Fixaball Countersunk Concrete Masonry Anchor Screw 8mm Torx BZP JCP

For medium duty anchoring, the Fixaball JCP Anker Bolt combines an 8mm concrete and masonry anchor screw with a countersunk Torx head and zinc/BZP plated finish. This self-tapping fixing uses a concave thread design that cuts its own thread in the pre-drilled hole and suits concrete, brick, stone, wood and concrete block.

As a non-expansion anchor, it fixes without stressing the concrete and can be adjusted or removed after installation. The M8 bolt requires an 8mm masonry drill bit with a 10mm tapping thread, and installation uses a T45 drill driver bit.

Available options

• 8mm x 60mm
• 8mm x 75mm
• 8mm x 100mm

Key features

• 8mm diameter
• 10mm thread
• Zinc/BZP plated finish
• Self-tapping concrete and masonry anchor screw
• Torx countersunk head
• Non-expansion anchor
• Suitable for concrete, brick, stone, wood and concrete block

Safety information

• Do not apply stress or load to the concrete screws until the concrete has fully cured.
• Over-drill the hole depth by 10/ 20mm.

Rackhams Reference : B4GSUH4H8B