Fixaball M12 Wall Shield Anchor Stud Nut Masonry Concrete Brick

For heavy-duty masonry fixings, this Fixaball M12 projecting bolt shield anchor provides a nut and stud type expansion fixing for concrete, brick, block and non-porous stone. The protruding threaded bar helps position fixtures during installation, making it suitable where items need to be held in place as they are fixed.

The anchor comprises a 3 part shield, threaded bar, nut and washer. Tightening the nut expands the shield at 3 points within the substrate. The threaded bar is high tensile grade 8.8.

Key features

• M12 thread diameter
• Nut and stud type projecting bolt masonry shield anchor
• Suitable for concrete, brick, block and non-porous stone
• 3 part shield with threaded bar, nut and washer
• High tensile grade 8.8 threaded bar
• Expansion anchor with 3 point outward expansion as the nut is tightened

Specifications

• Hole diameter: 20
• Hole depth: 85
• Fixture/material clearance hole: 13 – 14
• Center spacing between holes: 250
• Minimum distance from edge of material: 160
• Tensile/pull load: 9.7 k/N (tonnes)
• Shear load: 12.4 k/N (tonnes)
• Torque to tighten: 50 Nm

Available options

• Max joining thickness: 15mm
• Max joining thickness: 25mm
• Max joining thickness: 50mm
• Max joining thickness: 70mm

Safety information

• Take care not to damage the thread during installation.
• Load figures apply with correct installation.

Rackhams Reference : ZULTQLNESF