Arbor Garden Solutions Rectangular Pergola And Decking Kit With Balustrade V.9

Create a defined outdoor area with the Arbor Garden Solutions Rectangular Pergola and Decking Kit with Balustrade V.9, a coordinated pergola and decking kit supplied with pre-cut components and step-by-step instructions. Designed to provide a level base area, it’s a considered way to connect sections of a garden or patio while adding a structured focal point for outdoor living.

For rectangular layouts, the listed size refers to the total decking/base area rather than the pergola frame. The pergola is designed to span the full width and half the depth of the base, with a standard 45cm overhang on all sides (front/back and sides). Posts are supplied at 2.7m and can be trimmed if required for a free-standing structure.

Key features

• Pre-cut components with step-by-step instructions
• Decking boards: 32mm x 125mm grooved, green treated, FSC
• Rafters in CLS C16 Scandinavian Pine 2x6 (38mm x 138mm)
• Braces in CLS C16 Scandinavian Pine 2x4 (38mm x 89mm)
• Engineered uprights: 94x94 redwood ‘A’ quality, kiln dried 12/14%, laminated PAR, UC4, 70% PEFC certified
• Pre-assembled balustrades
• All necessary hardware for assembly included

How to assemble

• Prepare the area by ensuring a flat, level surface
• Assemble the decking frame by securing the joists, beams and decking planks, using the provided spacer block for spacing
• Install the pergola structure by positioning the upright posts, attaching runners and rafters, and securing via pre-drilled holes and included fixings
• Attach the pre-assembled balustrades, ensuring they are aligned and securely fixed
• Tools required: electric screwdriver, drill, socket wrench, spirit level and ladder
• Assembly also requires a 10mm socket and screwdriver; a battery-operated model is recommended

Treatment & maintenance

Natural timber colour variation is expected and may differ from images shown. Sweep regularly to remove debris, and every few months wash with mild soap and water using a soft-bristle brush; avoid pressure washers at high settings. Inspect at least once a year for loose fasteners or cracked boards and tighten or replace as needed. Apply a wood sealant or stain every 1-3 years; to check if sealing is needed, sprinkle water on the boards—if it absorbs quickly, apply a new coat.

Support & warranty

Lifetime warranty covers manufacturing faults.

Please note

The item will not be pre-painted or treated unless this is explicitly stated in the description or selected options.

Please note: Colours shown are as accurate as possible, though may vary slightly depending on your screen settings.

Natural timber products may vary in colour and grain from images shown.

Rackhams Reference : L2LYVF3H61