Fixaball Countersunk Concrete Masonry Anchor Screw 5mm Torx BZP JCP

For medium-duty anchoring in masonry and concrete, this Fixaball countersunk anchor screw features a 5mm shank with a 6mm self-tapping thread and a zinc/BZP plated finish. The Torx countersunk head sits flush, while the concave thread cuts its own thread into the substrate for low-torque installation and strong pull-out resistance.

Suitable for concrete, brick, stone, wood and concrete block, it provides a non-expansion fixing that can also be adjusted or removed after installation. A 5mm hole is required, and the hole depth should be over-drilled by 10/20mm.

Available options

• 5mm x 30mm
• 5mm x 50mm
• 5mm x 75mm
• 5mm x 100mm

Key features

• 5mm shank with 6mm thread
• Zinc/BZP plated
• Torx countersunk head
• Self-tapping concave thread
• 5mm anchor hole size
• Non-expansion fixing
• Suitable for concrete, brick, stone, wood and concrete block

Specifications

• Medium duty
• Hole depth should be over-drilled by 10/20mm
• Requires a 5mm masonry drill bit
• Requires a T25 drill driver bit

Sizing

• 5mm x 30mm
• 5mm x 50mm
• 5mm x 75mm
• 5mm x 100mm

Safety information

• Do not put any stress or load onto the concrete screws until the concrete has fully cured.

Rackhams Reference : VMNNLKVJF4