Fixaball Metric Repair Penny Washers BZP Zinc DIN9021 M5 - M12

For load spreading across a wider surface area, these Fixaball mudguard, repair and penny washers are finished in bright zinc plate and made to DIN 9021 and ISO 7093. The extra-large outside diameter suits use with threaded fasteners such as a bolt and nut, and can also help bridge damaged or oversized holes.

Compared with a conventional flat washer, this pattern provides broader load distribution at the fastening point. A range of metric sizes is available from M5 to M12, with each option listed at 1.5mm thick.

Key features

• Bright zinc plated finish
• Extra-large outside diameter
• Used with threaded fasteners including a bolt and nut
• Helps spread tightening load over a greater area than a conventional flat washer
• Suitable for damaged or oversized holes
• DIN 9021
• ISO 7093

Available options

• M5 x 20 x 1.5mm thick
• M5 x 25 x 1.5mm thick
• M5 x 30 x 1.5mm thick
• M6 x 20 x 1.5mm thick
• M6 x 25 x 1.5mm thick
• M6 x 30 x 1.5mm thick
• M6 x 40 x 1.5mm thick
• M6 x 50 x 1.5mm thick
• M8 x 25 x 1.5mm thick
• M8 x 30 x 1.5mm thick
• M8 x 40 x 1.5mm thick
• M8 x 50 x 1.5mm thick
• M10 x 25 x 1.5mm thick
• M10 x 30 x 1.5mm thick
• M10 x 40 x 1.5mm thick
• M10 x 50 x 1.5mm thick
• M12 x 38 x 1.5mm thick
• M12 x 50 x 1.5mm thick

Rackhams Reference : BQ7T7T1APA