Fixaball 1/4" Penny Repair Washers Stainless Steel A2 304 DIN9021

For imperial 1/4" fixings, these Fixaball penny repair mudguard washers are supplied in A2 / 304 stainless steel and made to DIN 9021 and ISO 7093. This metric equivalent uses M6 sizing, with an inner diameter 0.35mm larger, and suits the majority of general fastening applications where a broad bearing surface is required.

Repair washers have a particularly large outside diameter, helping to spread load and protect the surface at fastening points. They can also assist with spacing between connected components and with tightening or loosening a fastener.

Available options

• 1/4" x 20 x 1.3mm - 1.5mm
• 1/4" x 25 x 1.3mm - 1.5mm
• 1/4" x 30 x 1.3mm - 1.5mm
• 1/4" x 35 x 1.3mm - 1.5mm
• 1/4" x 40 x 1.3mm - 1.5mm
• 1/4" x 45 x 1.3mm - 1.5mm
• 1/4" x 50 x 1.3mm - 1.5mm
• 1/4" x 55 x 1.3mm - 1.5mm

Key features

• M6 metric equivalent for 1/4" fasteners
• A2 / 304 stainless steel
• Particularly large outside diameter
• DIN 9021
• ISO 7093

Sizing

• Inner diameter is 0.35mm larger than 1/4" equivalent
• 1/4" x 20 x 1.3mm - 1.5mm
• 1/4" x 25 x 1.3mm - 1.5mm
• 1/4" x 30 x 1.3mm - 1.5mm
• 1/4" x 35 x 1.3mm - 1.5mm
• 1/4" x 40 x 1.3mm - 1.5mm
• 1/4" x 45 x 1.3mm - 1.5mm
• 1/4" x 50 x 1.3mm - 1.5mm
• 1/4" x 55 x 1.3mm - 1.5mm

Rackhams Reference : C7Q1TEZMM6