Fixaball 5/16" Penny Repair Washers Stainless Steel A2 304 DIN9021

For broad load distribution at the fixing point, these Fixaball 5/16" penny repair mudguard washers are made from A2 / 304 stainless steel and conform to DIN 9021 and ISO 7093. This listing covers metric fasteners that fit imperial, with a 5/16" equivalent of M8.

Each washer has a large outside diameter typical of repair penny washers, making it suitable where a wider bearing surface is required. The inner diameter is 0.06mm smaller than 5/16", while remaining fit for purpose in the majority of circumstances.

Available options

• 5/16" x 20 x 1.3mm - 1.5mm
• 5/16" x 25 x 1.3mm - 1.5mm
• 5/16" x 30 x 1.3mm - 1.5mm
• 5/16" x 35 x 1.3mm - 1.5mm
• 5/16" x 40 x 1.3mm - 1.5mm

Key features

• 5/16" equivalent: M8
• A2 / 304 stainless steel
• Large outside diameter repair penny washer format
• Conforms to DIN 9021 and ISO 7093

Sizing

• Inner diameter is 0.06mm smaller than 5/16"
• 5/16" x 20 x 1.3mm - 1.5mm
• 5/16" x 25 x 1.3mm - 1.5mm
• 5/16" x 30 x 1.3mm - 1.5mm
• 5/16" x 35 x 1.3mm - 1.5mm
• 5/16" x 40 x 1.3mm - 1.5mm

Rackhams Reference : 974H98FH59